A pan lifted from a cool induction cooktop in a quartz counter, the zone underneath showing a small lit warning letter where the pan had been.

Dacor induction cooktop
showing C1

C1 on a Dacor Modernist induction cooktop means the top sensor is reading shorted.

(844) 252-4077

Mon–Sat, 8am–8pm

  • Temperature and overheat sensors
  • Induction board and coil repair
  • Source: Dacor

Book a visit

Three short steps, about a minute.

or call (844) 252-4077

Before you book,
in this order.

Each step comes from Dacor's own guidance for C1 on its cooktops. Follow it to the end: the last card says whether this is a visit.

01

Switch the cooktop off, then restart it.

02

If C1 remains, disconnect power for 30 seconds or more and reconnect.

03

Book a visit if C1 is still there.

Still there?

It usually turns into induction board and coil repair. Book with the code and the model number.

What not to do

C1 does not report an overheated cooktop. A shorted sensor reading is a circuit problem.

What you may
notice with it.

The cooktop problems C1 tends to arrive with. Answer these at the cooktop before anyone is booked.

All problems

Where C1 usually leads

Induction board and coil repair.

Induction power board, coil or sensor · moderate to highest.

In Dacor's own words

The top sensor is short.
Dacor Modernist induction cooktop user manual, Information codes Dacor Modernist induction cooktop user manual, Information codes

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Dacor Modernist induction cooktops DTI30M977BB and DTI36M977BB (manual dated 2017). Dacor gas cooktops and rangetops do not use this list.

Dacor C1 cooktop repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a teenager stirring a pan together over a gas cooktop set into a kitchen island
For the heart of your home.

Questions
about C1.

Can I clear C1 myself?
Switch the cooktop off, then restart it. If it comes back, it needs a visit.
How is C1 different from C0 on a Dacor cooktop?
Both concern the top sensor. C0 is an open reading and C1 is a shorted one; the repair path is similar.
Could a spill under the glass cause C1?
Liquid that reaches the wiring can short a sensor circuit. A technician checks for that before replacing the sensor.
Why does a Dacor Modernist induction cooktop stop with C1 when the glass is not hot?
C1 is a shorted reading from the top sensor, not a report of real heat. The control cannot trust the surface temperature, so it stops even on a cool top.

Back to your everyday

Still showing C1?

Book with the code copied exactly, the full model number, and whether there is any smell of gas or burning — with a code in hand, that is where the diagnosis starts.

(844) 252-4077 Schedule a repair