ZLINE FCIND induction cooktop
showing E4
E4 on the FCIND means a zone has detected abnormally low supply voltage.
Mon–Sat, 8am–8pm
- Induction power and coils
- Induction board and coil repair
- Source: ZLINE
Book a visit
Three short steps, about a minute.
or call (844) 252-4077
Loading appointment form…
The appointment form couldn’t load. Please try again.
What E4
actually means.
E4 on the FCIND means a zone has detected abnormally low supply voltage. Low voltage leaves the induction circuit unable to run properly, so the cooktop stops the zone and ZLINE asks you to check the power supply.
ZLINE cooktop display
What to do when E4 shows on the cooktopKind of codeInduction power and coils
An induction zone could not drive its coil as the board planned: no pan was detected, the current ran too high or too low, or the power stage reported trouble. The pan base, the supply voltage and a clogged air intake are checked before the coil or the power board is replaced, and a top that trips its breaker is left switched off until then.
Usually leads toInduction board and coil repair
Induction zones that stop sensing pans, cut out, buzz or show codes, traced to the power boards, the coils, their sensors and the links to the controls.
Shows up asCooktop Element Not Heating
A coil stays black, a radiant ring under the glass never glows, or a zone warms so weakly that a pot of water will not boil.
MakeZLINE
A US company that sells gas cooktops and rangetops, often bought online and installed by the owner's own contractor.
SourceZLINE FCIND induction cooktop user manual
ZLINE FCIND induction cooktops with anti-scratch glass (FCIND-24, FCIND-30, FCIND-36), July 2026 user manual. The older RCIND cooktop and the SINRT induction rangetop use different code lists.
Before you book,
in this order.
Each step comes from ZLINE's own guidance for E4 on its cooktops. Follow it to the end: the last card says whether this is a visit.
Check the breaker for the cooktop and whether anything else in the home is short of power.
Do not open the junction box or touch the supply wiring; a low-voltage problem in the home is work for an electrician with the power off.
If the supply looks normal and E4 remains, book a visit.
Still there?
It usually turns into induction board and coil repair. Book with the code and the model number.
What not to do
On the older RCIND, E4 is a sensor code, not a voltage code. It is also not an overheating code, so waiting for the glass to cool will not clear it.
What you may
notice with it.
The cooktop problems E4 tends to arrive with. Answer these at the cooktop before anyone is booked.
All problems
Cooktop Element Not Heating
6 causes, cheapest first
Where E4 usually leads
Induction board and coil repair.
ZLINE
cooktops.
A US company that sells gas cooktops and rangetops, often bought online and installed by the owner's own contractor.
ZLINE cooktop repairMore ZLINE codes
All 16 ZLINE codesInduction power and coils on other makes
Gas cooktop
A gas cooking surface dropped into a countertop cutout, with its gas line and power cord running down into the cabinet underneath.
Induction cooktop
A glass cooktop in the counter that heats the pan itself through magnetic coils, run by power boards and cooled by a fan underneath.
Rangetop
A pro-style gas cooking top with its knobs across the front, set into a notch above a base cabinet, often with a griddle or char-broiler beside the burners.
In ZLINE's own words
Abnormally low supply
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. ZLINE FCIND induction cooktops with anti-scratch glass (FCIND-24, FCIND-30, FCIND-36), July 2026 user manual. The older RCIND cooktop and the SINRT induction rangetop use different code lists.
ZLINE E4 cooktop repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about E4.
Can I clear E4 myself?
Why does E4 appear on my ZLINE cooktop when the dryer is running?
Does E4 on a ZLINE cooktop mean the board is bad?
Why does E4 stop only one zone on my ZLINE FCIND cooktop?
Back to your everyday
Still showing E4?
Book with the code copied exactly, the full model number, and whether there is any smell of gas or burning — with a code in hand, that is where the diagnosis starts.