ZLINE RCIND induction cooktop
showing E7/E8
The RCIND lists E7 and E8 as a temperature sensor or IGBT failure, the IGBT being the switch that powers the coil.
Mon–Sat, 8am–8pm
- Induction power and coils
- Induction board and coil repair
- Source: ZLINE
Book a visit
Three short steps, about a minute.
or call (844) 252-4077
Loading appointment form…
The appointment form couldn’t load. Please try again.
What E7/E8
actually means.
The RCIND lists E7 and E8 as a temperature sensor or IGBT failure, the IGBT being the switch that powers the coil. Either way the fix is a part inside the cooktop.
ZLINE cooktop display · also shown as E7, E8
What to do when E7/E8 shows on the cooktopKind of codeInduction power and coils
An induction zone could not drive its coil as the board planned: no pan was detected, the current ran too high or too low, or the power stage reported trouble. The pan base, the supply voltage and a clogged air intake are checked before the coil or the power board is replaced, and a top that trips its breaker is left switched off until then.
Usually leads toInduction board and coil repair
Induction zones that stop sensing pans, cut out, buzz or show codes, traced to the power boards, the coils, their sensors and the links to the controls.
Shows up asCooktop Element Not Heating
A coil stays black, a radiant ring under the glass never glows, or a zone warms so weakly that a pot of water will not boil.
MakeZLINE
A US company that sells gas cooktops and rangetops, often bought online and installed by the owner's own contractor.
SourceZLINE RCIND induction cooktop user manual
ZLINE RCIND induction cooktops (RCIND-24, RCIND-30, RCIND-36), June 2024 user manual. The manual pairs its codes, and the same numbers mean other things on the newer FCIND.
Before you book,
in this order.
Each step comes from ZLINE's own guidance for E7/E8 on its cooktops. Follow it to the end: the last card says whether this is a visit.
Switch the cooktop off at the breaker.
Keep the whole cooktop off, not just the zone that showed the code, until the part has been checked.
Book a visit; ZLINE warns against taking the unit apart yourself.
Still there?
It usually turns into induction board and coil repair. Book with the code and the model number.
What not to do
E7/E8 is not a supply or pan problem, so checking the breaker or swapping pans will not fix it. It is also not a heat-radiation stop like E6/E9 that clears once the cooktop cools.
What you may
notice with it.
The cooktop problems E7/E8 tends to arrive with. Answer these at the cooktop before anyone is booked.
All problems
Cooktop Element Not Heating
6 causes, cheapest first
Where E7/E8 usually leads
Induction board and coil repair.
ZLINE
cooktops.
A US company that sells gas cooktops and rangetops, often bought online and installed by the owner's own contractor.
ZLINE cooktop repairMore ZLINE codes
All 16 ZLINE codesInduction power and coils on other makes
Gas cooktop
A gas cooking surface dropped into a countertop cutout, with its gas line and power cord running down into the cabinet underneath.
Induction cooktop
A glass cooktop in the counter that heats the pan itself through magnetic coils, run by power boards and cooled by a fan underneath.
Rangetop
A pro-style gas cooking top with its knobs across the front, set into a notch above a base cabinet, often with a griddle or char-broiler beside the burners.
In ZLINE's own words
E7/E8 error
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. ZLINE RCIND induction cooktops (RCIND-24, RCIND-30, RCIND-36), June 2024 user manual. The manual pairs its codes, and the same numbers mean other things on the newer FCIND.
ZLINE E7/E8 cooktop repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about E7/E8.
Can I clear E7/E8 myself?
Is E7 on a ZLINE RCIND worth repairing?
Can I still use the other zones on a ZLINE RCIND with E8?
What part does E7 or E8 point to inside a ZLINE RCIND-24?
Back to your everyday
Still showing E7/E8?
Book with the code copied exactly, the full model number, and whether there is any smell of gas or burning — with a code in hand, that is where the diagnosis starts.